Presto acrylic scratch remover for use on headlights, wind shields, tacho housings makes old, faded and scratched surfaces look like new. No need to buy new when you can achieve an immaculate finish from a tube! Complete set includes: 1 tube plastic polish (50g), 1x polishing cloth, 2x specific grades of sandpaper, instruction manual. Be sure to read the instructions prior to commencing work. 1. Thoroughly clean surface and apply paste. 2. Polish for 2-3 minutes with good pressure with a soft, clean cotton cloth or pad. Do not polish transfers or painted areas. 3. Repeat process for deeper scratches. 4. Remove excess with a clean cloth. 5. For very deep scratches, use the sandpaper (1500 grit wet and dry) prior to applying the paste, then repeat the steps above.