Vespa Malossi Parts Front Shock Absorber Malossi RS24 227mm for Vespa GT, GTS, GTV, Sprint, Primavera

The RS24 Malossi is the flagship Malossi chassis and offers pretty much everything in terms of set up that you could wish for. The RS24 offers 24 click adjustment of rebound on the front and smooth preload adjustment.



Important note:

For the models listed below, Vespa uses two different types of shock absorbers, which can only be roughly classified into certain years of construction (mostly 2014-2016). These differ in the lower attachment and are therefore easy to identify. Either these are mounted with two screws or one screw. Before ordering, it should be checked on the vehicle whether the front damper is fixed with one or two screws. The shock absorber listed here uses two mounting screws.

The following models must be checked for the type of front shock absorber:

Vespa Primavera 50 2T 13-17 E2-E3 [ZAPC53200]

Vespa Primavera 50 4T 4V 13-17 E2 [ZAPC53100]

Vespa Primavera 50 4T 2V 14-17 25Km/h E2 [ZAPC5330]

Vespa Primavera 50 4T 4V 14-17 25Km/h E2 [ZAPC5330]

Vespa Primavera 50 4T 4V 14-19 E2 [ZAPC536B]

Vespa Sprint 50 2T 14-17 E2 [ZAPC53201]

Vespa Sprint 50 4T 2V 14-17 25Km/h E2 [ZAPC533]

Vespa Sprint 50 4T 4V 14-17 E2 [ZAPC53101]

Vespa Sprint 50 4T 4V 14-18 E2 [ZAPC536B]

Vespa GTS 125 ie Super 4V ABS/ o. ABS 09-16 E3 [ZAPM4530]

Vespa GTS 250 ie 4V E3 05-16 [ZAPM45100]

Vespa GTS 300 ie 4V ABS/ o. ABS 12-16 E3 (Europe) [ZAPM45200/ ZAPM45202]

Vespa GTS 300 ie 4V ABS 14-18 E3-E4 [ZAPM459L/ ZAPMA39L]

Vespa GTS 300 ie Super 4V ABS/ o. ABS E3 08-16 [ZAPM45200/ 202]

Vespa GTS 300 ie Super 4V ABS E3-E4 14-18 [ZAPM459L/ ZAPMA39L]

Vespa GTV 300 ie Touring 4V E3 10-16 [ZAPM459L]

For all other vehicles listed, this shock absorber will fit without prior checking.