3-shoe clutch as a replacement for Puch Maxi moped with 1-speed automatic E50 engine.
Reproduction clutch in good quality. Also replaces the 2-shoe clutch of the older models without adjustments.
OEM number for purpose of comparison only: 344.1.12.304.1
Mounting instructions:
First, set all adjustment screws flush with the clutch shoes. Then tighten each screw 2.5 turns. This achieves an almost optimal clutch engagement for a series engine. If an old crankshaft with spline and keyway is still mounted, the spline must be removed before installing the clutch. This was omitted from 1980 onwards anyway.
Reproduction clutch in good quality. Also replaces the 2-shoe clutch of the older models without adjustments.
OEM number for purpose of comparison only: 344.1.12.304.1
Mounting instructions:
First, set all adjustment screws flush with the clutch shoes. Then tighten each screw 2.5 turns. This achieves an almost optimal clutch engagement for a series engine. If an old crankshaft with spline and keyway is still mounted, the spline must be removed before installing the clutch. This was omitted from 1980 onwards anyway.