The BGM PRO ignition base plates for the Lambretta were one of the first BGM products. The first samples were presented at Eurolambretta 2007 in Neckarsulm. The base plate is based on the electronic ignition, which was introduced in 1970 with the Lambretta dl 200 electronic, later adapted by Piaggio for the Vespa and is probably the most widely used ignition.
With the 4.5 version of the ignition base plate, good gets even better. And the proven features remain of course and have even been improved in many small details.
In direct comparison, the BGM PRO ignition baseplate gives an extremely stable ignition spark and maximum light output due to the optimized number of windings and wiring.
New features include:
Available alternators are AC and DC versions:
With the 4.5 version of the ignition base plate, good gets even better. And the proven features remain of course and have even been improved in many small details.
- High light output (120W) due to maximum number of windings
- Proven excitation coil with copper plate for maximum reliability
- Pickup with carbon barrier layer for a clean ignition pulse
- Cleanly processed light coils
- High quality solder joints
- Grey and black bougie tube
- Sufficient cable length for individual wiring
- Optional spacers to adjust pickup height when used with pole wheels other than the BGM PRO rotor
In direct comparison, the BGM PRO ignition baseplate gives an extremely stable ignition spark and maximum light output due to the optimized number of windings and wiring.
New features include:
- Base plate with degree-accurate scaling for quick ignition adjustment during flash-off
- Extremely flexible and temperature-resistant silicone leads (-40°C to +250°C)
Available alternators are AC and DC versions:
- AC = alternating current = light via alternator
- DC = direct current = light via battery
