Honda ADV 150 Malossi Performance Torque Spring Malossi MHR yellow K7.3 / L105mm for Honda PCX 150, PCX 125, SH 125, ADV 150, SH Mode 125i ANC125E

Reinforced counter pressure spring from Malossi for the rear transducer.
The counter-pressure spring applies the pressure to the V-belt, which means that it no longer tends to slip and the traction on the belt is increased. Useful for tuned vehicles and problems with slipping belts.
Simply exchange for the original.

Unfortunately Malossi does not specify for Maxi-Scooters to what extent the pressure changes compared to the OEM counter-pressure spring. However, the spring stiffness (K) and the length of the spring are specified. Thus the springs can at least be compared with one another. In principle, the following applies to large scooters:

1. Green counter pressure springs are softer than the OEM spring
2. All other springs are harder than the OEM spring
3. the higher the (K) value, the harder the spring
4. If the (K) value is the same, the longer spring is harder
Works on the following models:
HONDA PCX 150 ie 4T LC euro 4 2018->
HONDA SH mode 125 ie 4T LC euro 3 (JF51E)
HONDA VARIO 150 ie 4T LC 2019-> (KF29E)
HONDA ADV 150 2021