The BGM PRO Superstrong clutch facings in the "Racing Red" version belong to the most performant facings on the market. Manufactured exactly according to our specifications, we have managed to use a high-quality organic clutch facing mixture which is pressure and temperature stable at the same time. All this combined with a very good grip to always have the full torque on the rear wheel. So even with a very high spring force the separation distance is short, because the material is not as soft and compressible as that of other manufacturers.
The pad carrier consists of steel like the original Cosa2 pads. This means that, unlike the clutch facings with aluminium carrier material, they also fit into conventional Cosa2 clutch baskets (no CNC) with retrofitted reinforcement ring (clutch facings with aluminium carrier have longer lugs for the greater wall thickness of the CNC clutch baskets, e.g. BGM Superstrong). The pads can easily be used in standard as well as in CNC clutch baskets.
support material: steel (as original)
lining material: Semi-Organic
-
pressure resistant
-
heat resistant
-
more grip
-
shorter separation distance
-
usable in series and racing engines
-
Low wear
-
Fits all Cosa2 clutch baskets (not baskets for CR80 rubbers with wide flaps)
TIPP>/strong>: It is best to replace the steel discs at the same time. These are often discoloured and distorted and thus prevent the clutch from functioning properly.
To complete the clutch pack, 4 steel plates are required (see Accessories).
1x steel disc with notch 1,5mm
2x steel disc without notch 1,5mm
1x steel disc (base disc) 2,0mm
The bgm PRO Superstrong Racing Red rubbers are also available directly in a complete set with BGM PRO steel discs.
AI-translation
