![crankshaft (old type) for Puch Maxi S / N 1-speed Automatic [E50] right-hand rotation](images/mittel/IP44400_1.jpg "crankshaft (old type) for Puch Maxi S N 1-speed Automatic [E50] right-hand rotation")
Crankshaft for Puch Maxi R50 (old type). The piston pin bearing is 13mm wide (instead of 15mm). This crankshaft is a replica of the old type crankshaft: with stronger collar for the crankshaft seal (22x40x7 enlarged oil seal).
This crankshaft uses left 17x40x7 and right 22x40x7 crankshaft seals and a crankshaft bearing 6203 (LAG.6203.C3) on the left and a crankshaft bearing with 12mm inner ring (LAG.6203.NR) on the right.
There must be 2 pieces 12x1mm thrust washers installed with. Please order separately!
This crankshaft uses left 17x40x7 and right 22x40x7 crankshaft seals and a crankshaft bearing 6203 (LAG.6203.C3) on the left and a crankshaft bearing with 12mm inner ring (LAG.6203.NR) on the right.
There must be 2 pieces 12x1mm thrust washers installed with. Please order separately!
