Rear replacement shock absorbers with progressive spring for mopeds.
The upper mount is 21mm wide and has a diameter of 32mm, the lower mount is also 21mm wide and has a diameter of 30mm. Thanks to the supplied reducing bushings, the shock absorbers are suitable for 8mm and 10mm mounting screws. The degree of hardness of the springs can also be adjusted in 5 steps. The adjustment key required for this is not supplied, but can be ordered optionally.
The shock absorbers are black, the length is measured from centre mounting eye to centre mounting eye. A pair of shock absorbers is supplied.
Important: The shock absorbers may only be installed together as a set and also only on scooters and mopeds, which are also factory equipped with 2 rear shock absorbers!
The upper mount is 21mm wide and has a diameter of 32mm, the lower mount is also 21mm wide and has a diameter of 30mm. Thanks to the supplied reducing bushings, the shock absorbers are suitable for 8mm and 10mm mounting screws. The degree of hardness of the springs can also be adjusted in 5 steps. The adjustment key required for this is not supplied, but can be ordered optionally.
The shock absorbers are black, the length is measured from centre mounting eye to centre mounting eye. A pair of shock absorbers is supplied.
Important: The shock absorbers may only be installed together as a set and also only on scooters and mopeds, which are also factory equipped with 2 rear shock absorbers!
